.webp?w=1264&h=265)
Create instant cable-routing points on compatible steel surfaces. The magnetic base grips in seconds, works with standard zip ties, and moves whenever your setup changes.
The published pull-strength claim reaches up to 22 lb per mount in ideal conditions. Real holding force changes with steel thickness, paint, curvature, dirt, orientation and cable direction.
Unlike drilled brackets or adhesive-only anchors, the magnetic mount can be removed and placed somewhere else when equipment moves, workstations change or you need a temporary routing point.
The protective coating between the magnetic base and compatible metal surface is designed to help reduce scratching and marring during normal use and repositioning.
Use them anywhere you have compatible steel and need a fast, removable tie-down point.
Route power leads, hoses and low-voltage wiring without committing to a permanent drilled location—useful around equipment that gets serviced, upgraded or rearranged.
The compact round base and raised zip-tie slots create a cable anchor without taking over the equipment surface.
Before installation, test the exact surface with an ordinary magnet.
Match the pack size to one small project, a full workstation or multiple garage and equipment setups.
Magnetic holding force changes with surface thickness, paint, curvature, dirt, vibration, vertical/shear loading and cable direction. Do not use these mounts to suspend people, valuable equipment or safety-critical loads.
Secure wires, cords and hoses on compatible steel in seconds, then move the routing point whenever your equipment or workspace changes.
loading